How To: Convert a Pressure Washer Into a Sewer Jetter


The best thing about pressure washers is that you can use a simple attachment and turn your device into a sewer jetter. This will help you clean your own sewer lines and drains without the hassle of calling a contractor to come clean for you.

In order to convert your pressure washer into a sewer jetter, you simply connect the pressure washer hose to the pressure. Then you are ready to remove the spray gun from the pressure washer hose, replace the spray gun with the ball valve, and fasten the ball valve to the jumper hose.

There is much more to know about converting your pressure washer into a sewer jetter, and the difference between sewer jetters and pressure washers. Lets dive right in!

What’s The Difference?

Many people automatically assume that pressure washers and sewer jetters are the same thing because they both utilize pressure. That is simply not the case. There are many factors that separate them from each other.

The most identifiable difference between the two is the hose and nozzle. Sew jetter hoses are lightweight and can be pushed and inserted when inside a pipe. the Nozzles are also designed to pull the hose into the line which gives proper cleaning.

The flow of the two devices is also another significant difference between the two. The average pressure washer flows between 2.5 GPM and 4.0 GPM, while a sewer jetters flow starts at 4.0 GPM and build up the gallons per minute from there.

Another difference between the two is the sewer jetters have more features than a pressure washer that includes a pressure gauge to help with adjusting and jetting.

Drive Types

There are three different drive types that categorize pressure washers and sewer jetters.

  1. Direct Drive Units– This type of pump is attached to the engine and the pump runs at the same RPM as the engine. Direct drive units are often sold at hardware stores.
  2. Belt Drive Units– This unit provides a reduction of speed between the pump and the engine and it’s the standard of the commercial cleaning industry.
  3. Gearbox Drive Units– This unit has a higher oil capacity and has pumps that provide the same speed reduction as the belt drive units. It also offers more space efficient design choices.

Converting a Pressure Washer Into a Sewer Jetter

The first thing you will need to do in order to convert your pressure washer into a sewer jetter is invest in a conversion kit. There are many greater conversion kits out there. Conversion kits always include these five things:

  • Nozzles
  • Hose reel
  • Jumper hose
  • Jetter Hose
  • Ball valves

Recommended Sewer Jetter Kits

There are many great sewer jetter kit options out there. We narrowed down some of the best kits based on reviews.

M Mingle– This sewer jetter kit includes a 100 ft. sewer jetter hose and an inner tube cover and reinforcement. It also has a button nose sewer jetter nozzle and a rotating nozzle. This sewer jetter kit also can connect to a pressure washer pump with an M22 coupler. Source.

Ridge Washer– This kit includes a button nose jet nozzle and rotating nozzle. This 50 ft. sewer jet hose is also ISO 9001 certified and it made up of three parts. The rotating sewer jet nozzle has three backwards spouts and the hose can connect to pressure washer pump with M22 coupler. Source.

Tokharoi– This kit includes a 50 ft. power washer hose, a rotating nozzle, and a button nozzle. This sewer spray hose consists of three layers of TPE

Converting the Pressure Washer

Now that you have your sewer jetter kit, you are ready for the next steps. First, you will need to connect the pressure washer hose to the pressure and then remove the spray gun from your pressure washer hose.

Next, you will replace the spray gun with the ball valve and then simply fasten the ball valve to the jumper hose. After that, you are ready to put one end of the jumper hose onto the other end of the jetter hose. You want to make sure that the jetter hose is at present and wrapped around the hose reel.

You are then ready to attach the right nozzle on the opposite end of the jetter hose. Then you will need to put the jetter hose into the pipe that you need to clean. Then finally, turn the pressure washer on and start cleaning!

How Do You Use a Sewer Jetter?

Before you use your sewer jetter, you will want to examine the body of the nozzle for any damage such as, cracks, obstructed holes, or worn threads. If there’s any visible damage on your sewer jetter, you should consider replacing it as soon as possible.

When you are ready to start cleaning, you must be sure that the nozzle is inserted into the line before turning the pressure on. Make sure that the nozzle is injected far enough into the line so that any backward facing jets wont risk harm to the worker using the sewer jetter.

Before removing the nozzle, you must always depressurize the system. Put a mark on the last 15 inches of the hose with either spray paint or tape. Make sure to do that in 5 sections so that you have an idea of how close the nozzle is to the entry as you get done with cleaning.

Here is a short video that shows you how to effectively use a sewer jetter:

Conclusion

With a sewer jetter you have a quick and efficient way to remove deeply seated clogs. The best thing about sewer jetters is that they don’t damage the pipes, while still being very powerful and getting the job done. Sewer jetters have the ability to reach far down into pipes unlike a mechanical auger.

It’s important to understand how sewer jetters work so that you can use it safely and properly. They’re great tools when used the right way, while being very simple and easy to use. Sewer jetters can save you a lot of money and they are low maintenance.

Recent Posts